To setup, change or reset the Wi-Fi network on your RainMachine Touch HD-12/16 or RainMachine Touch 1st gen, you will need physical access to the RainMachine Touch HD-12/16 touch screen interface, also the Wi-Fi USB thumb-stick has to be properly inserted into one of the two USB ports available and then you can follow these steps:

1. Tap on the "Settings" wrench button even if if is not light up

2. Swipe left on the screen until you see the "System" card and tap on it

3. Tap on "Wi-Fi" card and make sure it is "Enabled"

   • Choose your home Wi-Fi SSID name from the discovered network list (you may swipe on the screen left or right until you see the network name you wish to connect to).

   • Enter the password using the onscreen keyboard if required.

   • RainMachine will attempt to connect to your home Wi-Fi.

   • The Wi-Fi LED on the RainMachine device should turn solid ON.

4. Once successfully connected to the local Wi-Fi network and there is internet connection available, the RainMachine will begin to fetch the weather data and it will be available when using the RainMachine mobile/web apps with devices (mobile phones/tablets/desktops) connected to the same local Wi-Fi network.