[Bug] Water Saved Report is different between web (browser) client and android client

Gathering Feedback

Follow

Leap Frog Group

June 06, 2018 15:03

Mini-8 2nd Generation

Firmware version 4.0.926

Subject says it all - here's an example.  

Android: https://drive.google.com/open?id=1J5jskOz8DYEGUvimGrJP77dqVPmf_-xI

Browser: https://drive.google.com/open?id=166kmWNI5PLR2NuLqtj-Nfvq_DcsYRy_F

There is one program with four zones; each zone is set to water a fixed interval of 40 minutes (Weather Adjusted Duration is set to Fixed).  I have a hardware rain sensor enabled, and a single WUnderground weather station used as the weather input.   Cycle and Soak is set to Auto.  Rain Restriction is not set.

0

• 

  RainMachine Nicholas June 06, 2018 17:18

  Can you also check month/year graphs ? Maybe it's a data download issue or an interval difference.

  0

  Comment actions Permalink
• 

  Leap Frog Group June 06, 2018 17:24 (Edited June 06, 2018 17:25)

  Same results with Month/Year - the browser client reports zero (0) saved, the Android client says 1517 gallons (38%)

   

  This is a new installation and it has only been operational since Sunday, June 3rd.

  0

  Comment actions Permalink
• 

  RainMachine Nicholas June 06, 2018 17:30

  We'll have to check, maybe there is an issue on Web UI when handling missing data for those 7 days.

  0

  Comment actions Permalink
• 

  Leap Frog Group June 06, 2018 17:32

  OK - thanks for looking into this.  Let me know if you'd like access to the RainMachine -- it is exposed to the internet via port forwarding.

  0

  Comment actions Permalink
• 

  RainMachine Nicholas June 08, 2018 13:56

  I couldn't replicate on a fresh install by automatically running program once. Does this issue still persist on your device ? I might have to take a look at your device but I'll let you know privately. 

  0

  Comment actions Permalink
• 

  Leap Frog Group June 08, 2018 14:13

  Yes, the issue is still there.  Please email me privately for access.

  0

  Comment actions Permalink
• 

  Leap Frog Group June 09, 2018 16:09 (Edited June 11, 2018 18:15)

  I've been thinking about the "water saved" calculations and I'm wondering if the browser client is right and the Android client is wrong....

  How is the "water saved" calculation done when you have fixed watering times on all zones, and there have not been any pauses due to rain detection.  Wouldn't the "water saved" be zero percent?  (On the other hand, the "water used" on the browser client is zero - which is obviously wrong).

  0

  Comment actions Permalink

Please sign in to leave a comment.