The DavisWeahterLinkIP second Parser is not retrieving ET values from my Vantage Pro 2 weather system.  This is occurring for both my HD-12 and HD-16.

I can see the values for ET on the Davis console however, so I know it is calculating a daily value.

The following portion of my RainMachine log shows the value for 4/28 to be zero when in fact the value was .11  

This problem has resulted in the system not running any zones.  This has been going on since the irrigation season started.  I have switched to fixed schedules until this is fixed.

2019-04-28 14:56:36,512 - INFO - user-weatherlinkip2-parser:55 - Sent LOOP command
2019-04-28 14:56:41,520 - INFO - user-weatherlinkip2-parser:66 - Recv timeout (timed out) retrying.
2019-04-28 14:56:43,525 - INFO - user-weatherlinkip2-parser:69 - Sent LOOP command
2019-04-28 14:56:43,891 - INFO - user-weatherlinkip2-parser:77 - Parsing Response
2019-04-28 14:56:43,894 - INFO - user-weatherlinkip2-parser:118 - Barometer: 101.58
2019-04-28 14:56:43,895 - INFO - user-weatherlinkip2-parser:123 - Outside Temp: 16.6666666667
2019-04-28 14:56:43,897 - INFO - user-weatherlinkip2-parser:130 - Wind Speed (10min avg): 0.0
2019-04-28 14:56:43,899 - INFO - user-weatherlinkip2-parser:133 - Humidity: 39
2019-04-28 14:56:43,901 - INFO - user-weatherlinkip2-parser:139 - Solar Radiation: 759
2019-04-28 14:56:43,903 - INFO - user-weatherlinkip2-parser:144 - Day Rain: 0.0
2019-04-28 14:56:43,905 - INFO - user-weatherlinkip2-parser:150 - Day EvapoTranspiration: 0.0
2019-04-28 14:56:43,907 - INFO - user-weatherlinkip2-parser:157 - Condition: 6 -> 3

On the configuration page for the parser the UseStationEvapoTranspiration is checked.

Water surplus is the problem.  How can I reset it to start over?

Look at this ET data: https://www.dropbox.com/s/8jw59gs0740sb4t/ET%20Data%20April%202019.JPG?dl=0

What now?

If I had OpenWeatherMap configured to retrieve data with a free api would it download a value for ET which would be used if there is a problem with the weather station parser?

Update:  By making a change to the parser the daily ET data is now showing up in the log...however it looks like it is not being used by the Mixer.