After modifying the weatherlinkip parser the parser is now retrieving daily ET values as seen in the log however it looks like these values are not being used by the Mixer.
After a day of retrieving ET data from the weather station the ET graph shows only the Mixer and summer average values. It does not show any values from the weatherlinkIP parser. Other data from the weatherlinkip parser such as temp, humidity, pressure, etc. does show on the graphs.
It seems there is a problem with the Mixer picking up the Daily ET values from the database.
Here is my recent log that shows the data from weatherlinkip parser and Mixer data:
2019-05-11 08:04:39,812 - INFO - user-19-5-09-weatherlinkip-parser:55 - Sent LOOP command 2019-05-11 08:04:44,821 - INFO - user-19-5-09-weatherlinkip-parser:66 - Recv timeout (timed out) retrying. 2019-05-11 08:04:46,827 - INFO - user-19-5-09-weatherlinkip-parser:69 - Sent LOOP command 2019-05-11 08:04:47,392 - INFO - user-19-5-09-weatherlinkip-parser:77 - Parsing Response 2019-05-11 08:04:47,394 - INFO - user-19-5-09-weatherlinkip-parser:118 - Barometer: 98.194 2019-05-11 08:04:47,396 - INFO - user-19-5-09-weatherlinkip-parser:123 - Outside Temp: 16.1111111111 2019-05-11 08:04:47,398 - INFO - user-19-5-09-weatherlinkip-parser:130 - Wind Speed (10min avg): 0.0 2019-05-11 08:04:47,399 - INFO - user-19-5-09-weatherlinkip-parser:133 - Humidity: 68 2019-05-11 08:04:47,401 - INFO - user-19-5-09-weatherlinkip-parser:139 - Solar Radiation: 348 2019-05-11 08:04:47,409 - INFO - user-19-5-09-weatherlinkip-parser:144 - Day Rain: 0.0 2019-05-11 08:04:47,421 - INFO - user-19-5-09-weatherlinkip-parser:150 - Day EvapoTranspiration: 0.3556 2019-05-11 08:04:47,423 - INFO - user-19-5-09-weatherlinkip-parser:157 - Condition: 3 -> 18 2019-05-11 08:04:48,052 - INFO - rmMixer:123 - *** DATA IN THE PAST: 2019-05-10 00:00:00 2019-05-11 08:04:48,064 - INFO - rmMixer:124 - *** Received data: ('2019-05-10 00:00:00', temp=22.219999999999999/1, minTemp=None/0, maxTemp=None/0, rh=49/1, minRh=None/0, maxRh=None/0, wind=None/0, solarRad=591/1, skyCover=None/0, rain=0/1, et0=None/0, pop=None/0, qpf=None/0, condition=3/0, pressure=98.189999999999998/1, dewPoint=None/0, userData=None, minTemp=11.109999999999999/0, maxTemp=22.219999999999999/0, minRH=49/0, maxRH=74/0, et0cal=None, et0final=None) 2019-05-11 08:04:48,083 - INFO - rmMixer:131 - *** Added Existing data: '2019-05-10 00:00:00', temp=22.170000000000002/1, minTemp=None/0, maxTemp=None/0, rh=49/1, minRh=None/0, maxRh=None/0, wind=0.01/1, solarRad=589/1, skyCover=None/0, rain=0/1, et0=None/0, pop=0/1, qpf=0/1, condition=3/1, pressure=98.200000000000003/1, dewPoint=6.8799999999999999/1, userData=None, minTemp=11.109999999999999/1, maxTemp=22.289999999999999/1, minRH=48/1, maxRH=73/1, et0cal=97.084439036880767, et0final=97.079999999999998
ET from the weatherlinkip parser shows .3556mm
ET0 is none which seems to confirm that the Mixer is not getting the value from the parser
ET from the Mixer is 97.079
ET on the weather station console is .01 inch which matches the .3556mm
How does the Mixer get an ET of 97.079?
Here's a link to the ET Graph: https://www.dropbox.com/s/cdr71t6kzqn678e/ET%20Graph.JPG?dl=0
This is getting pretty frustrating especially since there has been zero comments made by
any RainMachine Support folks. I've put in a lot of time and $$ to put this set up
together and now I'm thinking of jumping ship and getting on the Rachio wagon or going
back to mcsSprinklers which was working flawlessly.
How about it, RainMachine Support, do you have any suggestions to solve this problem?
Please sign in to leave a comment.