Summary
You can view Water History as well as adjust your Dashboard Layout. You can also manually set a Rain Delay, or Set Restrictions to help customize your watering schedule. Not to mention the ability to adjust your Weather Data sources. You can change Network/Location/Time Settings, or view/update current Firmware Version or System Settings. You can even apply for Beta updates.
Diagram 1.1 App Settings
Water History
Provides a 7 day view of both Scheduled and Manual watering going back up to 365 days. Includes dates and times along with scheduled and duration watered. You also have the ability to email water history reports by pressing Export in the top right corner
|
Dashboard Graphs Allows for the customization of your Home/Dashboard Screen by enabling/disabling different graphs. |
Diagram 1.2 Dashboard Graphs |
Snooze
Delays all watering activities for a number of days. When the system is in “Snooze” mode all watering cycles are suspended for a set number of days, or until you manually “Resume” normal operation.
|
Provide the ability to Set Restrictions or allow for extra watering. You can Restrict watering based on Temperature, Months, Days, Hours. You can also allow for extra watering on a hot day. More info Diagram 1.2 Dashboard Graphs you to set a minimum run time. Any time below that threshold will rollover to the next watering cycle. |
|
Weather
Here you have the ability to enable/disable a wide variety of different weather stations including: NOAA, METNO, Weather Underground, Darksky.net, NETATMO, CIMIS, and Fawn. More information on enabling and configuring these Weather Data Sources can be found here.
System Settings
|
Provides the ability to make system changes to Network & Remote Access, Location, Date & Time. You can also perform a Factory Reset or Restore settings from a Backup. You can even reboot the device, or generate a Temporary Guest Pin.
|
Figure 1.4 Network & Remote Access |
Device Name - Provides a place to change the device name.
Network Settings - Allows you to configure WiFi settings and view signal strengnth .
Remote Access - Configures email address and sends verification email. Allows the password for remote access to be edited
|
Location - Setup/Edit current Location. Date - Editable date field Time - Editable time field Use 24-hour Format - Ability to change from normal 12 hour time to 24 hour Military time. Time Zone - Provides location to edit Time Zone. Units - Allows you to change views between US and Metric Values. |
Figure 1.5 Location Date & Time |
|
Restore from Backup - Restores zones, programs and watering restrictions. Generate Guest/Support Pin - Allows you to generate a Temp Pin good for 24 hours. Reboot Device - Allows you to reboot the device from the software. Reset to Defaults - Warning Restores initial Default Settings. |
Figure 1.6 Restore & Reset |
Figure 1.7 Updates
Software Update - Allows you up update the Controllers Firmware
|
Amazon Echo Alexa Integration - Allow local LAN integration with Amazon. Beta Quality Updates - Allows the controller to receive Beta Quality Updates. SSH Access - Enable/Disable SSH Access. More info about SSH here. Log Level - Allows you to control how much information is logged. |
Figure 1.8 Advanced Settings |
Comments
0 comments
Please sign in to leave a comment.