If you're experiencing issues with your sprinkler system, the first step is to verify if the RainMachine is supplying power to the valves. To do this, follow these steps to measure the valve output:

• Set your voltmeter to AC mode.
• Measure between the Common connector and the valve you want to test.
• Manually activate the corresponding zone on your RainMachine.
• Check the voltmeter reading; it should be approximately 24VAC.

If the reading is correct, the RainMachine is functioning properly.
If not, inspect the wiring or valves for potential issues.

This test can be done on all RainMachine products.