Fixed program issue

Follow

Cat22

October 13, 2018 21:24

RainMachine mini 8 with rain sensor attached

I have a fixed program that is set to ignore restrictions but it still does not run if rain is detected or freeze warning is on.

how can i make it run regardless of the two protections?

 

0

• 

  Istvan October 15, 2018 08:35

  Hello,

  Is your rain sensor wired to the rain sensor inputs, or is it in series with the common wire that is going to the valves?

  Thank you,

  Istvan
  RainMachine Support

  0

  Comment actions Permalink
• 

  Cat22 October 15, 2018 10:32

  Its the program that stops the watering, the sensor isn't wired in series with the valves

  The rain sensor is wired to the sensor terminals of the RainMachine Mini 8, it works well but I don't want to disable it in Settings because it will disable it for all programs. This one program I want to run without regard to Rain or Temperature, the other two programs need to obey the sensor and they do that ok

  Is there a way you can log onto my RM and take a look?

  0

  Comment actions Permalink
• 

  Christian October 16, 2018 11:47

  Hello,

  The Rain Sensor can be enabled or disable for all zones/programs, not for each program

  We are thinking of implementing this on programs in the future.

  In your case, you can select Fixed Watering Duration on the mentioned program but you have to leave the rain sensor active if it's needed on other programs.

  
  Regards,

  Christian

  RainMachine Support.

  0

  Comment actions Permalink

Please sign in to leave a comment.