How can we help?


Need to add RainMachine to app using IP address

Comments

3 comments

  • Avatar
    Justin Brophy

    Same, I sent a support request in. This new premium service is not so premium at the moment and I'm forced to place my mobile device on the same IoT VLAN to connect to the rainmachine via the app for a 'local' connection.

    0
    Comment actions Permalink
  • Avatar
    DDxx11 (Edited )

    Step 1: Test whether your VLAN routing/firewall rules are set up correctly to allow communication from your private LAN to your IO VLAN. To test, from your computer (or phone) browser on your private LAN, try to access the rainmachine's IP. It will likely give you a "NET::ERR_CERT_AUTHORITY_INVALID" warning message - ignore it and proceed to the site. If your firewall rules are set up correctly, it should ask you for your password to the rainmachine and let you log in
    Note: If you are unable to connect using the browser, your firewall rules are not set up correctly - go thru' your router manufacturer's forums/manuals/web-search to determine the right way to set up the rules.

    Step 2: If successful, on your app, use the Direct Access feature.
    Open upper left side hamburger menu - Network Settings - Direct Access - Add Device. 
    Give it a name and the input your RainMachine local IP address followed by :8080 port.
    Save it and return to DEVICES screen see if it is accessible.

     

    0
    Comment actions Permalink
  • Avatar
    Michael Hogan (Edited )

    Test whether your VLAN routing/firewall rules are set up correctly

    Yep, all good.

    Open upper left side hamburger menu - Network Settings - Direct Access - Add Device. 
    Give it a name and the input your RainMachine local IP address followed by :8080 port.

    Bingo! That was what I was looking for. Thanks!

    0
    Comment actions Permalink

Please sign in to leave a comment.